Smok Pen – How exactly to Change the Coil and Change the Flavour
The Smok Pen is fairly the interesting new electronic writing device. This can be a pen that you can use to write on paper and draw on with a pen or your finger. But it does so much more. It is possible to control its temperature, and you also are able to use it to spray an elixir of e-liquid. This short article will show you how exactly to change your Smok Pen into an incredible vaporizer.
Your body of the Smok Pen is made out of a durable stainless. That is why is it so nice and sturdy. However, the body of the vaporizer is covered in a fabric material that is not heat sensitive. So it’s perfect for anyone that might be allergic to heat. In addition, vapinger.com it works great if you are using it on a cold day. If you work with it outside for extended periods of time, then you should consider getting a model that has a built-in compressor.
The very best of the Smok Pen is constructed out of black silicone material. Once you place the pen onto its heating element, it gets hotter the outer skin of the silicone which in turn causes it to expand. When it does that, a small reservoir is made inside the pen’s body. When you place your individual Vaporizer Pen onto the reservoir, it is possible to start vaporizing your e-liquid.
If you want to turn your Smok Pen into a vaporizer, then you have to remove the metallic plate covering the coil. On some types of Smok Pens, the plate within the coil is located between the tank and your body. Other models could have the plate located on the bottom. If you have an authentic Smok Pen, then removing the plate will never be easy at all. Many people have reported that they have difficulty removing the plates, and sometimes, they even find yourself damaging their pen.
Should you have a genuine Smok Pen, then you should go ahead and remove the metal plate within the coil. The reason being the coil will be linked to a little metal sub-ohm tank. If you don’t remove the plate, then your e-liquids that are stored within it will begin to heat up. When this happens, the e-liquids risk turning into vapor instead of turning out to be liquid, and you also risk getting burned.
After you have removed the metallic cover, then you can access the two screws that are holding down the body of your Smok Pen. Carefully remove the screws, and then carefully take away the metal sub-ohm tank from the pen. It is important that you place your hands under the Smok Pen, since it is incredibly hot. Many papers have reported that they burned their hand when they were trying to unscrew the tank. When you have placed your hands beneath the pen, then turn on the battery and put it in the “fire” mode. It is important that you do not start the pen while the battery is in the “fire” mode, as the battery may start to obtain hot.
From then on, carefully pull the pen’s head from the coil. You will then need to remove the entire coil from the bottom of the pen, that may create a tight space where you could replace the coil. Carefully insert the new coil into the space. Make certain you follow all the instructions, and that you align the new coil in the same manner because the old one was aligned. You’ll then start the pen and apply the airflow control switch to set the airflow. If you follow these instructions carefully, you then will not have an issue together with your new airflow device.
Once you have finished replacing the coil, you will need to reconnect the battery to the electrical circuit board. Your smok vaporizer will now be ready again to use, and if you love it, you’ll benefit from the new airflow, and the beautiful flavours that it brings. If you feel that you want to purchase your own flavours, you should find out which flavours can be purchased in the Smok Pen range of e-liquids.